[. . . ] G1000 ® Integrated Flight Deck Cockpit Reference Guide for the Quest Kodiak 100 System Software 0552. 03 or later Flight instruments engine indication system nav/com/transponder/audio panel gps navigation Flight planning procedures hazard avoidance additional Features abnormal operation annunciations & alerts appendix index Copyright © 2007, 2008 Garmin Ltd. All rights reserved. This manual reflects the operation of System Software version 0552. 03 or later for the Quest Kodiak 100. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. Tel: 913/397. 8200 Fax: 913/397. 8282 Garmin AT, Inc. , 2345 Turner Road SE, Salem, OR 97302, U. S. A. [. . . ] Use the Joystick to move the pointer to the desired point on the map to be inserted as a waypoint in the flight plan. If the selected waypoint is to be placed anywhere other than the end of the flight plan, press the FMS Knob to activate the cursor. The default user waypoint naming is USR000, USR001, USR002, and so on. To change the user waypoint name, follow the procedure for modifying a user waypoint. EIS GPS Nav Nav/Com/ XPDR/Audio 3) 4) Flight Planning 5) Index Appendix Annun/Alerts Abnormal Operation Additional Features Hazard Avoidance Procedures 28 Garmin G1000 Cockpit Reference Guide for the Quest Kodiak 100 190-00645-01 Rev. A procedures procedures load and activate a departure procedure 1) 2) 3) 4) 5) 6) 7) 8) 9) Press the PROC Key. The cursor is displayed in the `DEPARTURE' field with a list of available departures. The cursor is displayed in the `TRANSITION' field with a list of available transitions. The departure is active when the flight plan is active. Flight Instruments EIS Nav/Com/ XPDR/Audio GPS Nav Flight Planning Procedures Hazard Avoidance activate a departure leg 1) 2) 3) 4) 5) Press the FPL Key on the MFD to display the active flight plan. Turn the large FMS Knob to highlight the desired waypoint within the departure. With `ACTIVATE' highlighted, press the ENT Key. Additional Features Abnormal Operation Annun/Alerts load an arrival procedure 1) 2) 3) Press the PROC Key. The cursor is displayed in the `ARRIVAL' field with a list of available arrivals. Appendix Index 190-00645-01 Rev. A Garmin G1000 Cockpit Reference Guide for the Quest Kodiak 100 29 procedures Flight Instruments 4) 5) 6) 7) 8) 9) Turn the large FMS Knob to highlight the desired arrival. Press the ENT Key. Nav/Com/ XPDR/Audio EIS 10) With `LOAD?' highlighted, press the ENT Key. GPS Nav 11) The arrival becomes part of the active flight plan. activate an arrival leg Flight Planning 1) 2) 3) 4) 5) Press the FPL Key on the MFD to display the active flight plan. Turn the large FMS Knob to highlight the desired waypoint within the arrival. With `ACTIVATE' highlighted, press the ENT Key. Hazard Avoidance Additional Features Procedures load and/or activate an approach procedure NOTE: If certain GPS parameters (WAAS, RAIM, etc. ) are not available, some published approach procedures for the desired airport may not be displayed in the list of available approaches. Abnormal Operation Annun/Alerts 1) 2) 3) 4) 5) Press the PROC Key. A list of available approaches for the destination airport is displayed. A list of available transitions for the selected approach procedure is now displayed. Index Appendix 30 Garmin G1000 Cockpit Reference Guide for the Quest Kodiak 100 190-00645-01 Rev. A procedures 6) Turn either FMS Knob to select the desired transition. The "Vectors" option assumes vectors will be received to the final course segment of the approach and will provide navigation guidance relative to the final approach course. If desired, the DA/MDA for the selected approach procedure may be entered and displayed on the PFD. Turn the small FMS Knob in the direction of the green arrow to change the display from OFF to BARO. Turn the small FMS Knob to enter the published DA/MDA for the selected approach procedure. Flight Instruments EIS 7) 8) Nav/Com/ XPDR/Audio 9) GPS Nav 10) Press the ENT Key. [. . . ] A Garmin G1000 Cockpit Reference Guide for the Quest Kodiak 100 annunciations & alerts Flight Instruments miscellaneous message advisories (cont. ) Message TRAFFIC FAIL ­ Traffic device has failed. Comments The system is no longer receiving data from the traffic system. The GDU's internal model cannot determine the exact magnetic variance for geographic locations near the magnetic poles. Displayed magnetic course angles may differ from the actual magnetic heading by more than 2°. [. . . ]